Gvrp - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Port
Profile ID
VLAN ID
Priority
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.

GVRP

GVRP Global
On this page, users can view and configure the GARP VLAN Registration Protocol (GVRP) global
settings. To view the following window, click L2 Features > VLAN > GVRP > GVRP Global, as shown
below:
The fields that can be configured are described below:
Parameter
Global GVRP State
Dynamic VLAN Creation
NNI BPDU Address
Click the Apply button to accept the changes made.
Figure 5-10 Protocol VLAN Profile Interface Window
Description
Select the port that will be used for this configuration here.
Select the 802.1v protocol VLAN profile ID here.
Enter the VLAN ID used here.
Select the priority value used here. This value is between 0 and 7. This
parameter is specified to re-write the 802.1p default priority previously
set in the switch, which is used to determine the CoS queue to which
packets are forwarded to. Once this field is specified, packets
accepted by the switch that match this priority are forwarded to the
CoS queue specified previously by the user.
Figure 5-11 GVRP Global Window
Description
Select to enable or disable the global GVRP state here.
Select to enable or disable the dynamic VLAN creation function here.
Select the NNI BPDU address option here. This option is used to
determine the BPDU protocol address for GVRP in service provide
site. It can use 802.1d GVRP address or 802.1ad service provider
GVRP address. Options to choose from are Dot1d and Dot1ad.
30