D-Link DXS-3600 Series Reference Manual page 127

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
After selecting the ACL profile and clicking the Add Rule button, users can configure the new ACL rule, in
the selected ACL profile, as shown below:
This is a dynamic page. Every selection made in the Protocol Type option will change the bottom part of
this page.
The fixed fields that can be configured are described below:
Parameter
Rule Number
Action
Protocol Type
After selecting the TCP option as the Protocol Type, the following page and parameters will be available,
as shown below:
Figure 8-57 Expert ACL (Add Rule) Window
Description
Enter the ACL rule number here. This value must be between 1 and
65535. If this value is not specified, the system will automatically
generate an ACL rule number for this entry.
Select the action that this rule will take here. Options to choose from
are Permit and Deny.
Select the protocol type option here. Options to choose from are TCP,
UDP, ICMP, EIGRP, ESP, GRE, IGMP, OSPF, PIM, VRRP, IP-in-IP,
PCP, Protocol ID, and None.
122