D-Link DXS-3600 Series Reference Manual page 194

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Port Security
Log Description
Event description: Address full on a port
Log Message: MAC address <macaddr> causes port security violation on
<interface-id>
Parameters description:
macaddr: The violation MAC address.
interface-id: The interface name.
Event description: Address full on system
Log Message: Limit on system entry number has been exceeded.
RIPng
Log Description
Event description: The RIPng state of interface changed
Log Message: RIPng-6-INTFSTATECHANGE :RIPng protocol on interface <intf-
name> changed state to <enabled | disabled>
Parameters description:
intf-name: Interface name.
Safeguard
Log Description
Event description: When the CPU utilization is over the rising threshold, the switch
enters exhausted mode.
Log Message: Unit <unit-id>, Safeguard Engine enters EXHAUSTED mode.
Parameters description:
unit-id: the unit ID
Event description: When the CPU utilization is lower than the falling threshold, the
switch enters normal mode.
Log Message: Unit <unit-id>, Safeguard Engine enters NORMAL mode.
Parameters description:
unit_id: the unit ID.
SNMP
Log Description
Event Description: SNMP request received with invalid community string
Log Message: SNMP request received from <ipaddr> with invalid community
string.
Parameters Description:
ipaddr: The IP address.
189
Severity
Warning
Warning
Severity
Informational
Severity
Warning
Informational
Severity
Informational