Subnet Vlan - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
When Host was selected as the VLAN Mode, the following page will appear.
The fields that can be configured are described below:
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.

Subnet VLAN

On this page, users can view and configure the subnet VLAN settings. A subnet VLAN entry is an IP
subnet-based VLAN classification rule. If an untagged or priority-tagged IP packet is received on a port,
its source IP address will be used to match the subnet VLAN entries. If the source IP is in the subnet of
an entry, the packet will be classified to the VLAN defined for this subnet. To view the following window,
click L2 Features > VLAN > Subnet VLAN, as shown below:
Description
Select the VLAN mode option here. Options to choose from are
Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, and Host.
Select the acceptable frame behavior option here. Options to choose
from are Tagged Only, Untagged Only, and Admit All.
Select to enable or disable the ingress checking function.
Figure 5-24 VLAN Interface (Host) Window
Description
Select the VLAN mode option here. Options to choose from are
Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, and Host.
Select the acceptable frame behavior option here. Options to choose
from are Tagged Only, Untagged Only, and Admit All.
Select to enable or disable the ingress checking function.
Figure 5-25 Subnet VLAN Window
39