Port Configuration; Port Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Port Configuration

Port Settings

On this page, users can view and configure the switch's port settings. To view the following window, click
System > Port Configuration > Port Settings, as shown below:
The fields that can be configured are described below:
Parameter
From Port ~ To Port
Medium Type
State
MDIX
Figure 3-9 Port Settings Window
Description
Select the appropriate port range used for the configuration here.
Select the port medium type here. Options to choose from are RJ45
and SFP.
Note: Selecting the SFP option, includes the use of SFP+ transceivers
for 10G connectivity.
Select this option to enable or disabled the physical port here.
Select the Medium Dependent Interface Crossover (MDIX) option
here. Options to choose from are Auto, Normal, and Cross.
Auto - Select this option for auto-sensing of the optimal type of
cabling.
Normal - Select this option for normal cabling. If this option is selected,
the port is in the MDI mode and can be connected to a PC's NIC using
a straight-through cable or a port (in the MDI mode) on another switch
through a cross-over cable.
Cross - Select this option for cross cabling. If this option is selected,
the port is in the MDIX mode and can be connected to a port (in the
MDI mode) on another switch through a straight cable.
13