Removing The Bezel - IBM System x3650 M4 Type 7915 Problem Determination And Service Manual

10. Slide the server into the rack.
11. Reconnect the power cords and all external cables, and turn on the server and

Removing the bezel

To remove the bezel, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Remove all the cables that are connected to the front of the server.
3. Remove the screws from the bezel.
4. Rotate the top of the bezel away from the server.
210
IBM System x3650 M4 Type 7915: Problem Determination and Service Guide
7. Make sure that the battery holder is secured firmly on the air baffle.
8. Install the filler.
9. Install the cover "Installing the cover" on page 206.
peripheral devices.
on page 191.