Removing An Optional Cd-Rw/Dvd Drive - IBM System x3650 M4 Type 7915 Problem Determination And Service Manual

Removing an optional CD-RW/DVD drive

To remove an optional CD-RW/DVD drive, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Slide the server out of the rack; then, remove the cover (see "Removing the
4. Press the release tab down to release the drive; then, while you press the tab,
5. From the front of the server, pull the drive out of the bay.
6. Remove the drive retention clip from the drive.
7. If you are instructed to return the CD-RW/DVD drive, follow all packaging
244
IBM System x3650 M4 Type 7915: Problem Determination and Service Guide
Release tab
on page 191.
external cables.
cover" on page 205).
push the drive toward the front of the server.
Drive retention clip
Alignment pins
instructions, and use any packaging materials for shipping that are supplied to
you.