IBM System x3650 M4 Type 7915 Problem Determination And Service Manual page 111

Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained
technician.
40000002-00000000 Certificate Authority
%1 has detected a
%2 Certificate Error.
(%1 =
IBM_CertificateAuthority.
CADistinguishedName;
%2 =
CIM_PublicKeyCertificate.
ElementName)
40000003-00000000 Ethernet Data Rate
modified from %1 to
%2 by user %3.
(%1 =
CIM_EthernetPort.Speed;
%2 =
CIM_EthernetPort.Speed;
%3 = user ID)
40000004-00000000 Ethernet Duplex
setting modified from
%1 to %2 by user
%3.
(%1 =
CIM_EthernetPort.
FullDuplex; %2 =
CIM_EthernetPort.
FullDuplex; %3 =
user ID)
40000005-00000000 Ethernet MTU setting
modified from %1 to
%2 by user %3.
(%1 =
CIM_EthernetPort.
ActiveMaximum
TransmissionUnit;
%2 =
CIM_EthernetPort.
ActiveMaximum
TransmissionUnit;
%3 = user ID)
Error A problem has
occurred with the
SSL Server, SSL
Client, or SSL
Trusted CA
certificate that has
been imported into
the IMM. The
imported certificate
must contain a
public key that
corresponds to the
key pair that was
previously
generated by the
Generate a New
Key and
Certificate
Signing Request
link.
Info A user has
modified the
Ethernet port data
rate.
Info A user has
modified the
Ethernet port
duplex setting.
Info A user has
modified the
Ethernet port MTU
setting.
1. Make sure that the certificate that
you are importing is correct.
2. Try importing the certificate again.
No action; information only.
No action; information only.
No action; information only.
Chapter 3. Diagnostics
93