IBM System x3650 M4 Type 7915 Problem Determination And Service Manual page 118

Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained
technician.
40000023-00000000 Flash of %1 from %2
succeeded for user
%3.
(%1 =
CIM_ManagedElement.
ElementName; %2 =
Web or LegacyCLI;
%3 = user ID)
40000024-00000000 Flash of %1 from %2
failed for user %3.
(%1 =
CIM_ManagedElement.
ElementName; %2 =
Web or LegacyCLI;
%3 = user ID)
40000025-00000000 The Chassis Event
Log (CEL) on system
%1 is 75% full.
(%1 =
CIM_ComputerSystem.
ElementName)
40000026-00000000 The Chassis Event
Log (CEL) on system
%1 is 100% full.
(%1 =
CIM_ComputerSystem.
ElementName)
100
IBM System x3650 M4 Type 7915: Problem Determination and Service Guide
Info A user has
successfully
updated one of the
following firmware
components:
v IMM main
application
v IMM boot ROM
v Server firmware
(UEFI)
v Diagnostics
v System power
backplane
v Remote
expansion
enclosure power
backplane
v Integrated
service
processor
v Remote
expansion
enclosure
processor
Info An attempt to
update a firmware
component from
the interface and
IP address has
failed.
Info The IMM event log
is 75% full. When
the log is full, older
log entries are
replaced by newer
ones.
Info The IMM event log
is full. When the
log is full, older log
entries are
replaced by newer
ones.
No action; information only.
Try to update the firmware again.
To avoid losing older log entries, save
the log as a text file and clear the log.
To avoid losing older log entries, save
the log as a text file and clear the log.