9. Dispose of the battery as required by local ordinances or regulations. See the
Installing the battery
The following notes describe information that you must consider when you replace
the battery in the server.
v You must replace the battery with a lithium battery of the same type from the
v After you replace the battery, you must reconfigure the server and reset the
v To avoid possible danger, read and follow the following safety statement.
v To order replacement batteries, call 1-800-IBM-SERV within the United States,
Statement 2:
Battery
Attention:
Neither tilt nor push the battery by using excessive force.
c. Use your thumb and index finger to lift the battery from the socket.
Attention:
Do not lift the battery by using excessive force. Failing to remove
the battery properly may damage the socket on the system board. Any damage
to the socket may require replacing the system board.
IBM Environmental Notices and User's Guide on the IBM Documentation CD for
more information.
same manufacturer.
system date and time.
and 1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and
Canada, call your support center or business partner.
Chapter 5. Removing and replacing server components
275