Table of Contents
Advertisement
Opening the cover
Complete the following steps to open the server cover:
1. Read the safety information beginning on page v and "Installation guidelines" on
2. Slide the server out from the rack.
3. Pull the release latch on the left side of the top cover to the right.
4. Using the finger hole in the release latch, open the left side of the cover; then,
Removing and replacing the bezel
Complete the following steps to remove the bezel:
1. Press on the two tabs at the top edge of the bezel, and pull the top of the bezel
14
xSeries 450: Option Installation Guide
page 11.
Latch
open the right side of the cover.
Attention:
For proper cooling and airflow, close the cover before turning on
the server. Operating the server for extended periods of time (over 15 minutes)
with the cover open might damage server components.
slightly away from the server.
Advertisement
Table of Contents
