IBM System x3650 M4 Type 7915 Problem Determination And Service Manual page 91

Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained
technician.
806f050c-2001xxxx Memory Logging
806f050c-2002xxxx Limit Reached for
806f050c-2003xxxx DIMM n Status.
806f050c-2004xxxx (n = DIMM number)
806f050c-2005xxxx
806f050c-2006xxxx
806f050c-2007xxxx
806f050c-2008xxxx
806f050c-2009xxxx
806f050c-200axxxx
806f050c-200bxxxx
806f050c-200cxxxx
806f050c-200dxxxx
806f050c-200exxxx
806f050c-200fxxxx
806f050c-2010xxxx
806f050c-2011xxxx
806f050c-2012xxxx
806f050c-2013xxxx
806f050c-2014xxxx
806f050c-2015xxxx
806f050c-2016xxxx
806f050c-2017xxxx
806f050c-2018xxxx
Error The memory
logging limit has
been reached.
1. Check the IBM support website for
an applicable retain tip or firmware
update that applies to this memory
error.
2. Swap the affected DIMMs (as
indicated by the error LEDs on the
system board or the event logs) to
a different memory channel or
microprocessor (see "Installing a
memory module" on page 250 for
memory population).
3. If the error still occurs on the same
DIMM, replace the affected DIMM.
4. (Trained technician only) If the
problem occurs on the same DIMM
connector, check the DIMM
connector. If the connector contains
any foreign material or is damaged,
replace the system board (see
"Removing the system board" on
page 290 and "Installing the system
board" on page 292).
5. (Trained technician only) Remove
the affected microprocessor and
check the microprocessor socket
pins for any damaged pins. If a
damage is found, replace the
system board (see "Removing the
system board" on page 290 and
"Installing the system board" on
page 292).
6. (Trained technician only) Replace
the affected microprocessor (see
"Removing a microprocessor and
heat sink" on page 279 and
"Installing a microprocessor and
heat sink" on page 282).
Chapter 3. Diagnostics
73