IBM System x3650 M4 Type 7915 Problem Determination And Service Manual page 50

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained
technician.
v Go to the IBM support website at http://www.ibm.com/supportportal/ to check for technical information,
hints, tips, and new device drivers or to submit a request for information.
Diagnostic
code Message
I.1800B [I.1800B] A cache size
mismatch has been
detected for one or
more processor
packages.
I.1800C [I.1800C] A cache type
mismatch has been
detected for one or
more processor
packages.
I.1800D [I.1800D] A cache
associativity mismatch
has been detected for
one or more processor
packages.
32
IBM System x3650 M4 Type 7915: Problem Determination and Service Guide
Description Action
Processors have one
1. Make sure that the microprocessor is on the
or more cache levels
with mismatched size.
2. Check the IBM support website for a firmware
3. (Trained technician only) Remove and
Processors have one
1. Make sure that the microprocessor is on the
or more cache levels
with mismatched type.
2. Check the IBM support website for a firmware
3. (Trained technician only) Remove and
Processors have one
1. Make sure that the microprocessor is on the
or more cache levels
with mismatched
associativity.
2. Check the IBM support website for a firmware
3. (Trained technician only) Remove and
ServerProven website at
http://www.ibm.com/systems/info/x86servers/
serverproven/compat/us/.
update and update the server firmware to the
latest level (see "Updating the firmware" on
page 297).
replace the affected microprocessor (error
LED is lit) with a supported type (see
"Installing a microprocessor and heat sink" on
page 282).
ServerProven website at
http://www.ibm.com/systems/info/x86servers/
serverproven/compat/us/.
update and update the server firmware to the
latest level (see "Updating the firmware" on
page 297).
replace the affected microprocessor (error
LED is lit) with a supported type (see
"Installing a microprocessor and heat sink" on
page 282).
ServerProven website at
http://www.ibm.com/systems/info/x86servers/
serverproven/compat/us/.
update and update the server firmware to the
latest level (see "Updating the firmware" on
page 297).
replace the affected microprocessor (error
LED is lit) with a supported type (see
"Installing a microprocessor and heat sink" on
page 282).