Installing the cover
To install the cover, complete the following steps.
1. Make sure that all internal cables are correctly routed (see "Internal cable
2. Place the cover-release latch in the open (up) position.
3. Insert the bottom tabs of the top cover into the matching slots in the server
4. Press down on the cover-release latch to lock the cover in place.
5. Slide the server into the rack.
Removing the air baffle
When you work with some optional devices, you must first remove the DIMM air
baffle to access certain components or connectors on the system board.
To remove the DIMM air baffle, complete the following steps.
206
IBM System x3650 M4 Type 7915: Problem Determination and Service Guide
routing and connectors" on page 194.)
chassis.
1
2
Cover-release
latch