Graphics Accelerator Driver - NEC Express5800 User Manual

Installing the Operating System with Express Setup 5-27
LAN Board Driver (N8104-121/125A/126)
The drivers for LAN Board Driver (N8104-121/125A/126) are automatically installed by Windows
Plug-and-Play. You do not need to install them manually.

Graphics Accelerator Driver

If you use standard graphics accelerator drivers, update your system with NEC
EXPRESSBUILDER DVD attached to your system.
Standard graphics accelerator drivers will be installed automatically.
Refer to "Graphics Accelerator Driver" described in Appendix D when you want to reinstall the
driver individually.
Installing SCSI Controller Driver (N8103-75/107)
If you use the SCSI Controller N8103-75/107, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.
Installing SAS Controller Driver (N8103-104A)
If you use the SAS Controller N8103-104A, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.
Installing Fibre Channel Controller Driver (N8190-127/131/153/154)
If you use the Fibre Channel Controller N8190-127/131/153/154, you do not need to install the
driver manually. It is automatically installed by Windows Plug-and-Play.