NEC Express5800 User Manual page 145

7.
[Load parameters] steps are displayed.
[Do not load parameters]
(1) Select [Do not load parameters].
(2) Click [Next].
IMPORTANT: The setup using a parameter file saved in the Flash FDD
is not supported.
NOTE: If a floppy disk drive is not connected, select this item.
[Load parameters]
(1) Insert the floppy disk containing the parameters file.
(2) Select [Load parameters], enter the file path of the parameters file into the text box.
(3) Click [Next].
Installing the Operating System with Express Setup 5-11