NEC Express5800 User Manual page 98

4-28 Configuring Your Server
BMC LAN Configuration submenu
When [BMC LAN Configuration] is selected in the Server menu and then the Enter key is pressed,
the screen below is displayed.
IMPORTANT:
used for a different LAN.
For details about the options, see the following table.
Option
BMC Network
Configuration
Shared BMC LAN
LAN Connection
Type
IP Address
Subnet Mask
Default Gateway
The management-dedicated LAN connector cannot be
Parameters
–
Disabled
Enabled
[Auto Negotiation]
100Mbps Full Duplex
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex
[192.168.1.1]
[255.255.255.0]
[0.0.0.0]
Description
Set this option to [Disabled] if the management
LAN port is used.
If this option is set to [Enabled], it is not
possible to use LAN1 as both a normal and
management LAN, so the management LAN
port becomes unavailable.
Specify the connection type for management
LAN port.
Specify an IP address for the management
LAN.
Specify a subnet mask for the management
LAN.
Specify a default gateway for the management
LAN.
–