Device Installation Or Removal Procedure; Side Cover - NEC Express5800 User Manual

9-6 Upgrading Your Server

DEVICE INSTALLATION OR REMOVAL PROCEDURE

Install or remove a component from the server in the following procedure.

Side Cover

The left side cover should be removed to access to built-in devices and/or mother board in the
server.
Removal
Remove the left side cover in the following procedure.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Loosen the two screws.
3.
Hold the lever and move the side cover toward the rear of the server to remove it.
4.
Hold the side cover securely to remove it.
Screws
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages
1-3 to 1-9 for details.
Disconnect the power plug before working with the server.

WARNING
Lever