NEC Express5800 User Manual page 567

Command Line (Example)
C:\VBS> cscript //nologo Sensor.vbs
Execution Result (Example)
===========================================
ID String = Front Panel Temp
Sensor Type = Temperature
Current Value = 27 degrees C
===========================================
ID String = Baseboard Temp1
Sensor Type = Temperature
Current Value = 50 degrees C
===========================================
ID String = Baseboard Temp2
Sensor Type = Temperature
Current Value = 53 degrees C
===========================================
ID String = IO Riser Temp
Sensor Type = Temperature
Current Value = 43 degrees C
===========================================
ID String = M1 DIMM 1A Temp
Sensor Type = Temperature
Current Value = 37 degrees C
===========================================
:
:
Inlet air temperature data is obtained from the sensor that contains the character string "Amb",
"Ambient", or "Front Panel" in its ID String.
In the example above, the data is obtained from "Front Panel Temp" sensor, and the sensor reading
is 27ºC.
Accessing Power and Performance Data I-7