Windows Server 2008 R2; Notes On Windows Installation - NEC Express5800 User Manual

Windows Server 2008 R2

This section explains how to install Windows Server 2008 R2 by using the Express Setup.
IMPORTANT: The Scalable Networking Pack (SNP) function is
disabled in the system that installed by Express Setup.
The setting of SNP function may affect the system performance, so
refer to the attention of SNP detail in the following site before setting it.
http://www.nec.com/global/prod/express/
NOTE: If you install Windows Server 2008 R2 without using Express
Setup, see Appendix D.

Notes on Windows Installation

This section explains the notes on the Windows installation.
Confirm these notes before starting the Express Setup.
About the Windows Family
This computer supports the following Windows editions:
Windows Server 2008 R2 Standard (hereinafter, referred to as "Windows Server 2008

R2")
Windows Server 2008 R2 Enterprise (hereinafter, referred to as "Windows Server 2008

R2")
On installing other OS, contact sales dealer or the maintenance service representative.
BIOS Settings
Confirm the BIOS settings described in Chapter 4 before installing Windows Server 2008 R2.
Service Pack Which EXPRESSBUILDER Supports
The NEC EXPRESSBUILDER DVD attached to the server supports following combination of the
OS installation media and Service Pack.
Windows Server 2008 R2

– OS installation media (No Service Pack)
Installing the Operating System with Express Setup 5-3