Appendix H Using A Client Computer Which Has A Cd Drive - NEC Express5800 User Manual

Appendix H
Using a Client Computer Which Has a CD
Drive
The NEC EXPRESSBUILDER disk is DVD so that a client computer which you want to use for
managing the server needs a DVD drive.
If you want to install the management software of EXPRESSBUILDER to the client without the
DVD drive, make a CD-R from EXPRESSBUILDER DVD according to the following steps.
NOTE:
installing the management software to the client.
1.
Insert the EXPRESSBUILDER DVD to the computer which has a DVD drive.
2.
If Autorun menu appears, close the menu.
3.
Copy the below files of EXPRESSBUILDER to a hard disk by using Explorer.
\(root folder): copy version.xml
\017
4.
Delete the ar_menu\autorun_menu.xml on the hard disk, and rename the
ar_menu\autorun_en.xml on the hard disk to the autorun_menu.xml.
5.
Copy the above files/folders to a CD-R.
Match the root folder when you burn a CD-R.
6.
Delete the files/folders that you copied at step 3.
7.
Insert the CD-R to a client computer which you want to install the management software.
8.
Kick the below file of the CD-R by using Explorer.
\017\ar_menu\autorun_menu.exe
autorun_menu_x64.exe
This procedure can copy only one CD at the purpose of
\ar_menu : copy this sub-folder
\doc : copy this sub-folder
\win : copy this sub-folder
(for Windows 32 bit edition)
(for Windows 64 bit edition)