NEC Express5800 User Manual page 295

Displayed Error Message
C106 BMC set in progress
monitoring timeout.
C107 BMC command access
failed.
C108 Could not redirect
the console - BMC Busy -
C109 Could not redirect
the console - BMC Error -
C10A Could not redirect
the console - BMC
Parameter
Error -
C10B BMC Platform Information
Area corrupted.
C10C BMC update firmware
corrupted.
C10D Internal Use Area of
BMC FRU corrupted.
C10E BMC SDR Repository
empty.
C10F IPMB signal lines do
not respond.
C110 BMC FRU device failure.
Description
The BMC check was interrupted.
BMC command access failed.
Console redirection was not
possible (BMC busy).
Console redirection was not
possible (BMC error).
Console redirection was not
possible (BMC parameter error).
BMC device (chip) error
Failure of the SROM for storing
chassis information
BMC device (chip) error
SMC (Satellite Management
Controller) failure
Failure of the SROM for storing
chassis information
Troubleshooting 8-17
Recommended Action
Turn off the power, and
then restart the server.
If this does not resolve
the problem, contact
your service
representative.
This is not a fatal error,
but turn off the power,
and then restart the
server. If this does not
resolve the problem,
contact your service
representative.
Turn off the power, and
then restart the server.
If this does not resolve
the problem, contact
your service
representative.
This is not a fatal error,
but turn off the power,
and then restart the
server. If this does not
resolve the problem,
contact your service
representative.
This is not a fatal error,
but turn off the power,
and then restart the
server. If this does not
resolve the problem,
contact your service
representative.