Installing And Setting Device Drivers - NEC Express5800 User Manual

5-22 Installing the Operating System with Express Setup

Installing and Setting Device Drivers

Follow these steps to install and configure the device drivers.
LAN Driver and PROSet
The LAN driver and PROSet have been installed automatically while your system was being
updated in the previous section.
NOTES:
To change the LAN driver and PROSet settings, log on to the

system from a local console using an administrator account.
Remotely changing the settings by using the operating system's
remote desktop feature is not supported.
[Internet Protocol (TCP/IP)] check-box is necessary checked to set

an IP Addresses. According to the circumstances, the check-box is
not checked from begin. Manually checked the check box and set an
IP addresses.