Table of Contents
Advertisement
Graphics Accelerator Driver
The standard graphics accelerator driver installed by "Update NEC Express5800 system" is
automatically installed.
The following is the procedure when it is necessary to install manually.
If you want to utilize optional Graphics Accelerator Driver board, follow the document attached to
the board to install the driver.
1.
Insert the NEC EXPRESSBUILDER DVD into the DVD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "Setup.exe" in the following directory.
\001\win\winnt\w2k3amd\video\setup.exe.
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER DVD from the DVD-ROM drive, follow the
direction on the screen and restart the system.
Installing Disk Array Controller Driver
(N8103-90)
The Disk Array Controller driver will be installed automatically.
Installing SAS Controller Driver
(N8103-104)
If you utilize SAS controller driver (N8103-104), update your system with NEC
EXPRESSBUILDER DVD attached to your system.
The SAS controller driver will be installed automatically.
Installing Windows Server 2003 x64 Editions D-19
Advertisement
Table of Contents
