Appendix B Other Precautions; Transfer Rate Of The On-Board Lan Controller; Server Management Software; Floppy Disk - NEC Express5800 User Manual

N8100-1665f/1666f/1667f
Hide thumbs Also See for Express5800:
Table of Contents

Advertisement

Appendix B
Other Precautions

Transfer Rate of the On-board LAN Controller

The onboard network interface controller supports 10Base-T and 100Base-TX networks and a
capable of full or half duplex.
The controller can automatically detect and switch for network speed and transfer mode connected
to the HUB. However, for proper network operation, specify the link speed and duplex mode to the
same value as the value specified for HUB.

Server Management Software

The NEC EXPRESSBUILDER DVD that comes with the server contains the NEC ESMPRO utility.
NEC recommends that you should install the NEC ESMPRO for effective use of the reliability
enhancement features of the server.

Floppy Disk

The following describes use of the floppy disk.
Floppy disk type
The server uses 3.5-inch floppy disks. You can use the following two types of 3.5-inch floppy disks:
2HD floppy disk (double-sided high-density track type)
Stores data of 1.44MB.
2DD floppy disk (double-sided double-density track type)
Stores data of 720KB.
Insertion direction
indicator
Label
Write protection
hole
Shutter
Head window
Centering hub
High-density media hole
(2HD only)
Front
Catching hole
Centering hole
Write protection switch
Rear

Advertisement

Table of Contents
loading

This manual is also suitable for:

T120b-mExpress5800/t120b-m

Table of Contents