NEC Express5800 User Manual page 457

10.
The folder reference dialog box appears.
Select a path in the NEC EXPRESSBUILDER DVD, and then click [OK].
– If the Onboard RAID Controller (LSI Embedded MegaRAID) is used:
<drive letter>:\017\win\winnt\oemfd\ws2008r2\fd1\megasr1
– If the N8103-129/130 RAID Controller is used:
<drive letter>:\017\win\winnt\oemfd\ws2008r2\fd1\megasas2
After you select the path, a list of drivers is displayed.
Select the following driver, and then click [OK]. Go to Step 11.
– If the Onboard RAID Controller (LSI Embedded MegaRAID) is used:
[LSI Embedded MegaRAID]
– If the N8103-129/130 RAID Controller is used:
[LSI MegaRAID SAS 9264-8i]
11.
Remove the NEC EXPRESSBUILDER DVD and set Backup DVD-ROM or Windows
Server 2008 R2 DVD-ROM.
12.
Select the disk where a partition will be created, and then click [Drive options
(advanced)].
IMPORTANT: If the partition has already been created, go to step 15.
NOTE:
The following message might be displayed when not replacing
it with OS installation media after driver's reading. Please replace with
OS installation media when it is displayed, and click "refresh".
Installing Windows Server 2008 R2 D-11