NEC Express5800 User Manual page 405

Installation
Install a board connected to a PCI board slot in the following procedure.
IMPORTANT:
not route the SCSI cable between PCI boards. If the cable contacts with
the IC and elements on PCI board, the PCI board or cable may be
damaged.
NOTE:
connector matches the connector of the PCI board slot.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the side cover.
3.
Remove the additional slot cover and a screw at the same location (height) as the
installation slot.
IMPORTANT:
future use.
When installing several PCI boards in PCI slots, do
When installing a PCI board, make sure that the board
Keep the additional slot cover being removed for
Upgrading Your Server 9-67