NEC Express5800 User Manual page 242

6-4 Installing and Using Utilities
Tool menu (Normal mode)

If you select this item, the Tool menu appears.
You can use the below functions for maintenance.
– Maintenance Utility
The Maintenance Utility is usually used by the service representative. (See Chapter 8.)
– BIOS/FW Updating
You can update the system BIOS by using the Flash FDD or USB FDD.
– ROM-DOS Startup FD
The ROM-DOS Startup FD is used for starting the ROM-DOS system.
– Test and diagnostics
This function allows you to diagnose this computer. (See Chapter 7.)
– System Management
The parameters of BMC (Baseboard Management Controller) are set for remote control
and alert. This menu's function is the same as the "System Management" of the
"Maintenance Utility".