NEC Express5800 User Manual page 96

4-26 Configuring Your Server
The table below shows the operation when the AC power to the server is turned off once and then
back on, in accordance with the [AC LINK] setting.
System status before AC power off
Operating
Aborting (DC power being off also)
Forced shutdown
* Press the POWER/SLEEP switch continuously for four seconds or longer. This forcibly
turns off the power.
IMPORTANT:
Power Supply), select [Server] - [AC LINK] - [Power On].
Off
Off
Off
To turn on the server from the UPS (Uninterruptible
Setting of AC LINK
Stay Off Last State
On
Off
Off
Power On
On
On
On