NEC Express5800 User Manual page 398

N8100-1665f/1666f/1667f
Hide thumbs Also See for Express5800:
Table of Contents

Advertisement

9-60 Upgrading Your Server
Connecting SAS Device
N8151-77 internal LTO and N8151-90 internal LTO can be installed in either of the following
methods:
Connect the device with N8103-104A SAS controller.
Connect the device with Onboard RAID Controller or optional RAID Controller.
To connect with RAID Controller, the following conditions must be satisfied:
Server must have 3.5-inch disk cage equipped
RAID Controller connected to the disk cage must have vacant SAS/SATA port.
If the server has only one 3.5-inch disk cage, you may use the separately priced SAS cable
(K410-198(00)) for connecting between SAS device and vacant port on RAID controller.
Removal
Remove the 5.25-inch device in the reverse procedure of the installation.

Advertisement

Table of Contents
loading

This manual is also suitable for:

T120b-mExpress5800/t120b-m

Table of Contents