NEC Express5800 User Manual page 60

2-28 General Description
Notes on handling the Flash FDD
Do not turn off the server while the access LED of the Flash FDD is blinking.

Turning off the server at this time can cause a failure or data corruption.
The Flash FDD is a consumable.

If the Flash FDD causes an error, use a new Flash FDD.
The Flash FDD cannot be connected by way of a USB hub.

Directly connect the Flash FDD to a USB connector of the server.
Before touching the Flash FDD, discharge static electricity from your body by touching a

nearby metal object (such as a doorknob or aluminum frame).
Do not disassemble the Flash FDD.

Do not apply a strong force to the Flash FDD.

Do not place the Flash FDD in an area directly exposed to sunlight or near a heater.

Do not handle the Flash FDD while eating, drinking, or smoking. Also, be careful not to

get thinner, alcohol, or other corrosive substances on the Flash FDD.
Be careful when connecting the Flash FDD to the server.

Do not move the server or Flash FDD while the Flash FDD is inserted into a server USB

connector. Doing so might cause a Flash FDD failure.
After using the Flash FDD, disconnect it from the server.
