Inch Hard Disk Drive (In N8154-25 3.5-Inch Disk Cage) - NEC Express5800 User Manual

9-10 Upgrading Your Server

3.5-inch Hard Disk Drive (in N8154-25 3.5-inch Disk Cage)

The 3.5-inch disk cage (N8154-25) can contain up to four hard disk drives. No hard disk drive is
contained in disk cage.
IMPORTANT:
a third-party hard disk drive may cause a failure of the server as well as
the hard disk drive. Purchase hard disk drives of the following models:
– N8150-208A (160GB, 7,200 rpm, SATA2/300)
– N8150-209A (250GB, 7,200 rpm, SATA2/300)
– N8150-274 (500GB, 7,200 rpm, SATA2/300)
– N8150-263 (1TB, 7,200 rpm, SATA2/300)
– N8150-278 (2TB, 7,200 rpm, SATA2/300)
A hard disk drive having the thickness of 1 inch (25.4 mm) can be installed on each of the slots.
Installing an optional 3.5-inch disk cage allows the server to be equipped with up to eight hard disk
drives. See "3.5-inch Disk Cage" described later for details.
The port numbers are factory-assigned as PORT0 to PORT3 from bottom to top bay.
IMPORTANT:
Use the dummy tray dedicated to the disk cage.

The purpose of a dummy tray is to increase the cooling effect in the

server. Install a dummy tray in slots not containing a hard disk
drive.
Use the hard disk drives authorized by NEC. Installing
Slot for additional
3.5-inch disk cage
PORT3
PORT2
PORT1
PORT0