NEC Express5800 User Manual page 317

Power ON/OFF (Wake On LAN) feature does not work:
Immediately after the AC power is turned on, the Remote Power ON/OFF feature
→
(Wake ON LAN) is disabled. Start Windows 2003 once, provide settings as shown
below, then shutdown the system. After restart, the Remote Power On/Off feature
is available unless the AC power is turned off.
Select [Start] → [Administrative Tools] → [Computer Management].
Select Device Manager, double-click [Intel(R) PRO/1000EB Network Connection
with I/O Acceleration #n] under Network Adapter, and specify as follows in
[Detail] tab.
PME:
Wake On: [Magic Packet]
The system time lags:
If you do not use the server that adjust time such as NTP (Network Time Protocol)
→
Server, the system time may differ from actual time.
In this case, use NTP server or disable "Windows Time Service".
[ON]
Troubleshooting 8-39