NEC Express5800 User Manual page 214

5-80 Installing the Operating System with Express Setup
When PROSet is installed
1.
Start Device Manager.
2.
Point to [Network adapters] and double click following adapter.
Open the adapter [Properties].
[Intel(R) 82576 Gigabit Dual Port Server Network Connection]
[Intel(R) 82576 Gigabit Dual Port Server Network Connection #2]
3.
Click [Power Management] tab and change setting in [Wake On LAN] according to the
following list.
Setting item
"Wake On Directed Packet"
"Wake On Magic Packet"
"Wake on Magic Packet from power off state"
"Wake on Link"
IMPORTANT: WOL do not work by DirectedPacket (* 1) on shutdown
state even "Wake On Directed Packet" is "ON".(WOL work by
DirectedPacket on sleep and hibernate state.)
*1 The packet which includes Ethernet address of adapter in Ethernet
Header or the Packet including the IP address assigned by IP Header
to adapter.
NOTES:
[Power Saver Options] setting is not necessary to change.

Above setting will be maintained until manually resetting are

executed.
4.
Click [OK].
5.
Restart the system.
IMPORTANT: The parameters of [Wake On LAN] will not exist, if the
network ports are not available for WOL.
Using WOL Not using WOL
ON or OFF OFF
ON OFF
ON OFF
OFF OFF