NEC Express5800 User Manual page 518

F-14 Installing Windows Server 2003 x64 Editions
Application Process of "Updating the System"
"Updating the System" applies the drivers necessary for NEC Express5800 Series.
Follow this process after Hotfix for Windows x64 (KB921411) or Hotfix for Windows Server 2003
(KB921411) had been applied.
NOTE:
to your system, you do not have to apply Service pack 2 again.
1.
Log on to the system with the account that has administrative privilege
(e.g.administrator).
2.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive of server.
The Autorun Menu will be displayed
3.
Left-click on [Setup Windows], and then click [Update the system].
NOTE:
outcome.
4.
When the following message appears, click [OK].
IMPORTANT: There is no problem in operation though the following
messages might be displayed while executing "Updating the system".
It will disappear after a few seconds, and do not click [Cancel] while it
is displayed.
If you install Windows CD-ROM that contains Service Pack 2
Right-clicking on the Autorun Menu produces the same