NEC Express5800 User Manual page 227

When the system is Windows Server 2003
Follow the procedure below to specify.
1.
Select [Control Panel] and click [System].
The [System Properties] dialog box appears.
2.
Select [Advanced] tab.
3.
Click [Settings] on the [Startup and Recovery] group box.
IMPORTANT:
Windows Server 2003 x64 Editions
To specify "Complete Memory Dump" to write the debug

information is recommended.
If the mounted memory size is larger than 2GB, "Complete Memory
Dump" cannot be specified so that specify "Kernel Memory Dump"
instead.
Specify the drive where there is a free area more than the size of

"the memory capacity mounted on Express server + 1MB".
In case the mounted memory size exceeds 2GB due to the added

memory, change the write debugging information to [Kernel
Memory Dump] before adding memory. The size of debugging
information (memory dump) to be taken also changes due to adding
memory. Verify the size of the empty space in the debugging
information (memory dump) write destination drive.
Windows Server 2003
To specify "Complete Memory Dump" to write the debug

information is recommended.
If the mounted memory size is larger than 2GB, "Complete Memory
Dump" cannot be specified so that specify "Kernel Memory Dump"
instead.
Specify the drive where there is a free area more than the size of

"the memory capacity mounted on Express server + 12MB"(In case
the memory capacity is more than 2GB, a free area of
"2048+12MB" or more).
In case the mounted memory size exceeds 2GB due to the added

memory, change the write debugging information to [Kernel
Memory Dump] before adding memory. The size of debugging
information (memory dump) to be taken also changes due to adding
memory. Verify the size of the empty space in the debugging
information (memory dump) write destination drive.
Installing the Operating System with Express Setup 5-93