Table of Contents
Advertisement
Graphics Accelerator Driver
The standard graphics accelerator driver is automatically installed by "Update NovaScale R480 E1 system".
The following is the procedure when it is necessary to install manually.
If you want to utilize optional Graphics Accelerator Driver board, follow the document attached to the board to install
the driver.
1.
Insert the EXPRESSBUILDER DVD into the CD-RW/DVD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "Setup.exe" in the following directory.
\001\win\winnt\w2k3amd\video\setup.exe.
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to continue.
5.
Remove the EXPRESSBUILDER DVD from the CD-RW/DVD-ROM drive, follow the on-screen
instructions and restart the system.
Installing the Disk Array Controller Driver (LSILOGIC MEGARAID SAS 8480E)
The Disk Array Controller driver will be installed automatically.
Installing the SAS Controller Driver (LSISAS3443E-R)
If you use the SAS controller driver (LSISAS3443E-R), update your system using the EXPRESSBUILDER DVD
attached to your system.
The SAS controller driver will be installed automatically.
D-15
Advertisement
Table of Contents
