Windows Server 2008 Clean Installation - NEC Express5800 User Manual

Windows Server 2008 Clean Installation

This section explains how to perform a clean installation of Windows Server 2008.
IMPORTANT: The installation procedure depends on your
environment.
Follow steps below appropriate to your environment.
1.
Turn on your system.
IMPORTANT: To install Windows Server 2008, you may need to
update BIOS. To check if your system needs a BIOS update, go to:
http://www.nec.com/express/.
2.
Insert the Windows Server 2008 DVD-ROM into your DVD-ROM drive.
NOTE:
MegaRAID)", "OEM-Disk" is necessary.
3.
Restart the system.
To restart the system, press Ctrl + Alt + Del or turn off the system once, and then turn it
on again.
IMPORTANT:
DVD], press Enter while the message is displayed. If the Windows
installation screen (shown in step 4) does not appear, turn off the system,
and then turn it on again.
The DVD-ROM starts. A message "Windows is loading files ..." appears.
4.
Select a language and other options from the drop-down lists, and then click [Next].
When you use "Onboard RAID controller (LSI Embedded
When prompted to [press any key to boot from CD or
Installing Windows Server 2008 E-11