Alcatel OmniSwitch 6600 Family Network Configuration Manual page 398

RADIUS Servers
Num. Standard Attribute
19 Callback-Number
20 Callback-Id
21 Unassigned
22 Frame-Route
23 Framed-IPX-Network
24 State
25 Class
26 Vendor-Specific
27 Session-Timeout
28 Idle-Timeout
29 Termination-Action
30 Called-Station-Id
31 Calling-Station-Id
32 NAS-Identifier
33 Proxy-State
34 Login-LAT-Service
35 Login-LAT-Node
36 Login-LAT-Group
37 Framed-AppleTalk-Link
38 Framed-AppleTalk-Network
39 Framed-AppleTalk-Zone
60 CHAP-Challenge
61 NAS-Port-Type
62 Port-Limit
63 Login-LAT-Port
page 20-10
Notes
Not supported. These attributes are used for dial-up sessions;
not applicable to the RADIUS client in the switch.
Sent in challenge/response packets.
Used to pass information from the server to the client and
passed unchanged to the accounting server as part of the
accounting-request packet.
See "Vendor-Specific Attributes for RADIUS" on
page 20-11.
Not supported.
Not supported.
Not supported. These attributes are used for dial-up sessions;
not applicable to the RADIUS client in the switch.
OmniSwitch 6600 Family Network Configuration Guide
Managing Authentication Servers
April 2006