Configuring DHCP Relay
DHCP Relay Defaults
The following table describes the default values of the DHCP Relay parameters.
Parameter Description
Default UDP service.
Forward delay time value for DHCP Relay
Maximum number of hops
Packet forwarding option
Automatic switch IP configuration for
default VLAN 1.
Automatic switch IP configuration packet
type (BootP or DHCP)
Relay Agent Information Option
Switch-level DHCP Snooping
VLAN-level DHCP Snooping
OmniSwitch 6600 Family Network Configuration Guide
Command
ip udp relay
ip helper forward delay
ip helper maximum hops
ip helper standard
ip helper avlan only
ip helper per-vlan only
ip helper boot-up
ip helper boot-up enable
ip helper agent-informa-
tion
ip helper dhcp-snooping
ip helper dhcp-snooping
vlan
April 2006
DHCP Relay Defaults
Default Value/Comments
BOOTP/DHCP
3 seconds
4 hops
Standard
Disabled
BootP
Disabled
Disabled
Disabled
page 18-3