Alcatel OmniSwitch 6600 Family Network Configuration Manual page 511

Configuring QoS
In this example, the rule my_rule does not display because it is inactive. Rules are inactive if they are
administratively disabled through the policy rule command, or if the rule cannot be enforced by the
current hardware. Although my_rule5 is administratively active, it is still pending and not yet applied to
the configuration. Only mac1 is displayed here because it is active on the switch.
See the OmniSwitch CLI Reference Guide for more information about the output of these commands.
OmniSwitch 6600 Family Network Configuration Guide April 2006
Creating Policies
page 24-31