VLAN Rules Specifications
VLAN Rules Specifications
IEEE Standards Supported
Maximum number of VLANs per switch
Maximum number of rules per VLAN
Maximum number of rules per switch
Switch ports eligible for VLAN rule classifi-
cation (dynamic VLAN assignment)
Switch ports not eligible for VLAN rule
classification
CLI Command Prefix Recognition
VLAN Rules Defaults
Parameter Description
IP network address rule subnet mask
IPX network address rule encapsulation
page 8-2
802.1Q–Virtual Bridged Local Area Networks
802.1v–VLAN Classification by Protocol and Port
802.1D–Media Access Control Bridges
4094
Unlimited
8129 of each rule type, except for a DHCP generic
rule because only one is allowed per switch.
Mobile 10/100 Ethernet and gigabit ports.
Non-mobile (fixed) ports.
802.1Q tagged fixed ports.
Link aggregate ports.
All VLAN management commands support prefix
recognition. See the "Using the CLI" chapter in the
OmniSwitch 6600 Family Switch Management Guide
for more information.
Command
vlan ip
vlan ipx
OmniSwitch 6600 Family Network Configuration Guide
Defining VLAN Rules
Default
The IP address class range;
Class A, B, or C.
Ethernet-II
April 2006