Show 802.1Q Information - Alcatel OmniSwitch 6600 Family Network Configuration Manual

Configuring an 802.1Q VLAN

Show 802.1Q Information

After configuring a port or link aggregation group to be a tagged port, you can view the settings by using
the show 802.1q command, as demonstrated:
-> show 802.1q 3/4
Acceptable Frame Type
Force Tag Internal
Tagged VLANS
-------------+-------------------------------------------------+
2
-> show 802.1q 2
Tagged VLANS
-------------+-------------------------------------------------+
3
To display all VLANs, enter the following command:
-> show vlan port
page 11-8
: Any Frame Type
:
Internal Description
TAG PORT 3/4 VLAN 2
Internal Description
TAG AGGREGATE 2 VLAN 3
OmniSwitch 6600 Family Network Configuration Guide
off
Configuring 802.1Q
April 2006