What Is A Multiple Spanning Tree Region - Alcatel OmniSwitch 6600 Family Network Configuration Manual

MST General Overview

What is a Multiple Spanning Tree Region

A Multiple Spanning Tree region represents a group of 802.1s switches. An MST region appears as a
single, flat mode instance to switches outside the region. A switch can belong to only one region at a time.
The region a switch belongs to is identified by the following configurable attributes, as defined by the
IEEE 802.1s standard:
Region name–An alphanumeric string up to 32 characters.
•
Region revision level–A numerical value between 0 and 65535.
•
VLAN to MSTI table–Generated when VLANs are associated with MSTIs. Identifies the VLAN to
•
MSTI mapping for the switch.
Switches that share the same values for the configuration attributes described above belong to the same
region. For example, in the diagram below:
Switches A, B, and C all belong to the same region because they all are configured with the same
•
region name, revision level, and have the same VLANs mapped to the same MSTI.
The CST for the entire network sees Switches A, B, and C as one virtual bridge that is running a single
•
Spanning Tree instance. As a result, CST blocks the path between Switch C and Switch E instead of
blocking a path between the MST region switches to avoid a network loop.
The paths between Switch A and Switch C and the redundant path between Switch B and Switch C
•
were blocked as a result of the Internal Spanning Tree (IST) computations for the MST Region. See
"What is the Internal Spanning Tree (IST) Instance" on page 6-9
OmniSwitch 7800
Switch B
In addition to the attributes described above, the MST maximum hops parameter defines the number of
bridges authorized to propagate MST BPDU information. In essence, this value defines the size of the
region in that once the maximum number of hops is reached, the BPDU is discarded. The maximum
page 6-8
Switch A
OmniSwitch 7800
||
IST
OmniSwitch 7800
||
Switch C
MST Region
OmniSwitch 6600 Family Network Configuration Guide
Using 802.1s Multiple Spanning Tree
for more information.
Switch D
OmniSwitch 7800
CST
OmniSwitch 7800
||
Switch E
SST Switches (STP or RSTP)
April 2006