14 Configuring Ip; Chapter 14 Configuring Ip; In This Chapter - Alcatel OmniSwitch 6600 Family Network Configuration Manual

Omniswitch 6600 series
Hide thumbs Also See for OmniSwitch 6600 Family:
Table of Contents

Advertisement

Internet Protocol (IP) is primarily a network-layer (Layer 3) protocol that contains addressing and control
information that enables packets to be forwarded. Along with Transmission Control Protocol (TCP), IP
represents the heart of the Internet protocols. IP has two primary responsibilities: providing connection-
less, best-effort delivery of datagrams through an internetwork; and providing fragmentation and reassem-
bly of datagrams to support data links with different Maximum Transmission Unit (MTU) sizes.
Note. IP routing (Layer 3) can be accomplished by using static routes or by using one of the IP routing
protocols: Routing Information Protocol (RIP), Open Shortest Path First (OSPF). For more information on
these protocols see
Chapter 16, "Configuring RIP,"
OmniSwitch 6600 Family Advanced Routing Configuration Guide.
There are two versions of Internet Protocol supported: IPv4 and IPv6. For more information about using
IPv6, see
Chapter 15, "Configuring IPv6."

In This Chapter

This chapter describes IP and how to configure it through the Command Line Interface (CLI). It includes
instructions for enabling IP forwarding, as well as basic IP configuration commands (e.g.,
CLI commands are used in the configuration examples; for more details about the syntax of commands,
see the OmniSwitch CLI Reference Guide. This chapter provides an overview of IP and includes informa-
tion about the following procedures:
IP Forwarding
-
-
-
-
-
-
-
"Configuring the Router Primary Address" on page 14-13
-
-
OmniSwitch 6600 Family Network Configuration Guide

14 Configuring IP

in this manual; or "Configuring OSPF" in the
April 2006
ip
default-ttl).
page 14-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents