Ipv6 Specifications; Ipv6 Defaults - Alcatel OmniSwitch 6600 Family Network Configuration Manual

IPv6 Specifications

IPv6 Specifications
RFCs Supported
Maximum IPv6 router VLANs per switch
Maximum IPv6 interfaces per VLAN
Maximum IPv6 interfaces per tunnel
Maximum 6to4 tunnels per switch
Maximum configured tunnels per switch

IPv6 Defaults

The following table lists the defaults for IPv6 configuration through the ip command.
Description
Global status of IPv6 on the
switch
IPv6 interfaces
page 15-2
2460–Internet Protocol, Version 6 (IPv6) Specification
2461–Neighbor Discovery for IP Version 6 (IPv6)
2462–IPv6 Stateless Address Autoconfiguration
2463–Internet Control Message Protocol (ICMPv6) for the
Internet Protocol Version 6 (IPv6) Specification
2464–Transmission of IPv6 Packets Over Ethernet
Networks
2893–Transition Mechanisms for IPv6 Hosts and Routers
3513–Internet Protocol Version 6 (IPv6) Addressing Archi-
tecture
3056–Connection of IPv6 Domains via IPv4 Clouds
4094
1
1
1
255
Command
N/A
ipv6 interface
OmniSwitch 6600 Family Network Configuration Guide
Configuring IPv6
Default
Enabled
None
April 2006