Chapter 12 Configuring Static Link Aggregation; In This Chapter - Alcatel OmniSwitch 6600 Family Network Configuration Manual

Omniswitch 6600 series
Hide thumbs Also See for OmniSwitch 6600 Family:
Table of Contents

Advertisement

12 Configuring Static Link
Alcatel's static link aggregation software allows you to combine several physical links into one large
virtual link known as a link aggregation group. Using link aggregation can provide the following benefits:
Scalability. You can configure up to 30 link aggregation groups that can consist of 2, 4, or 8 on a
single switch and 2, 4, 8, or 16 links in a stack.
Reliability. If one of the physical links in a link aggregate group goes down (unless it is the last one)
the link aggregate group can still operate.
Ease of Migration. Link aggregation can ease the transition from a 100 Mbps Ethernet backbones to
Gigabit Ethernet backbones.
Note. This chapter only covers static link aggregation for OmniSwitch 6600 Family switches. Please refer
to the OmniSwitch 7700/7800/8800 Network Configuration Guide for information on configuring static
link aggregation on OmniSwitch 7700, 7800, and 8800 switches and the OmniSwitch 6800 Series Network
Configuration Guide for OmniSwitch 6800 Series switches. These switches use different procedures and
have many different operating ranges.

In This Chapter

This chapter describes the basic components of static link aggregation and how to configure them through
the Command Line Interface (CLI). CLI commands are used in the configuration examples; for more
details about the syntax of commands, see the OmniSwitch CLI Reference Guide.
Configuration procedures described in this chapter include:
Configuring static link aggregation groups on
Adding and deleting ports from a static aggregate group on
Modifying static link aggregation default values on
Note. You can also configure and monitor static link aggregation with WebView, Alcatel's embedded
web-based device management application. WebView is an interactive and easy-to-use GUI that can be
launched from OmniVista or a web browser. Please refer to WebView's online documentation for more
information on configuring and monitoring static link aggregation with WebView.
OmniSwitch 6600 Family Network Configuration Guide
Aggregation
page
12-7.
page
12-9.
page
12-15.
April 2006
page 12-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents