Enabling A Port Monitoring Session; Disabling A Port Monitoring Session; Deleting A Port Monitoring Session; Pausing A Port Monitoring Session - Alcatel OmniSwitch 6600 Family Network Configuration Manual

Diagnosing Switch Problems
In addition, you can also specify optional parameters shown in the table below. These parameters must be
entered after the slot and port number.
keywords
file
no overwrite
bidirectional
disable
For example, to configure port monitoring session 6 on port 2/3 and administratively enable it enter:
-> port monitoring 6 source 2/3 enable
These keywords can be used when creating the port monitoring session or afterwards. See the sections
below for more information on using these keywords.

Enabling a Port Monitoring Session

To disable a port monitoring session use the
monitoring followed by the user-specified session ID number, source, the slot number of the port to be
monitored, a slash (/), the port number of the port, and enable. For example, to enable port monitoring
session 6 on port 2/3 enter:
-> port monitoring 6 source 2/3 enable

Disabling a Port Monitoring Session

To disable a port monitoring session use the
followed by the port monitoring session ID and pause. For example, to disable port monitoring session 6
enter:
-> port monitoring 6 disable

Deleting a Port Monitoring Session

To delete a port monitoring session use the no form of the
monitoring followed by the port monitoring session ID. For example, tot delete port monitoring session 6
enter:
-> no port monitoring 6

Pausing a Port Monitoring Session

To pause a port monitoring session use the
followed by the port monitoring session ID and pause. For example, to pause port monitoring session 6
enter:
-> port monitoring 6 pause
To resume a paused port monitoring session use the
monitoring followed by the port monitoring session ID and resume. For example, to resume port moni-
toring session 6 enter:
-> port monitoring 6 resume
OmniSwitch 6600 Family Network Configuration Guide
no file
inport
timeout
port monitoring source
port monitoring
port monitoring
port monitoring
port monitoring
April 2006
size
outport
enable
command by entering port
command by entering port monitoring
command by entering no port
command by entering port monitoring
command by entering port
Port Monitoring
page 27-21