Diagnosing Switch Problems
Displaying Health Threshold Limits
The
show health threshold
as individual thresholds for input traffic (RX), output/input traffic (TX/RX), memory usage, CPU usage
and chassis temperature.
To view all health thresholds, enter the following command:
-> show health threshold
Rx Threshold
TxRx Threshold
Memory Threshold
CPU Threshold
Temperature Threshold
To display a specific health threshold, enter the show health threshold command, followed by the appro-
priate suffix syntax:
rx
•
txrx
•
memory
•
cpu
•
temperature
•
For example, if you want to view only the health threshold for memory usage, enter the following
command:
-> show health threshold memory
Memory Threshold
Note. For detailed definitions of each of the threshold types, refer to
ture Thresholds" on page
CLI Reference Guide.
OmniSwitch 6600 Family Network Configuration Guide
command is used to view all current health thresholds on the switch, as well
= 80
= 80
= 80
= 80
= 50
= 80
27-34, as well as
Chapter 1, "Health Monitoring Commands,"
"Configuring Resource and Tempera-
April 2006
Monitoring Switch Health
in the OmniSwitch
page 27-35