Configuring Vlan Rule Classification - Alcatel OmniSwitch 6600 Family Network Configuration Manual

Configuring VLANs

Configuring VLAN Rule Classification

VLAN rule classification triggers dynamic VLAN port assignment when traffic received on a mobile port
matches the criteria defined in a VLAN rule. Different rule types are available for classifying different
types of network device traffic. It is possible to define multiple rules for one VLAN and rules for multiple
VLANs. However, only IP and IPX protocol rules support the dynamic assignment of one mobile port to
multiple VLANs.
The following table provides a list of commands used to define the various types of VLAN rules. For
more detailed information about rule criteria and classification, see
Rule Types
DHCP
Binding
MAC address
Network address
Protocol
Custom (user-defined)
Port
OmniSwitch 6600 Family Network Configuration Guide
Command
vlan dhcp mac
vlan dhcp mac range
vlan dhcp port
vlan dhcp generic
vlan binding mac-ip-port
vlan binding mac-port-protocol
vlan binding mac-port
vlan binding mac-ip
vlan binding ip-port
vlan binding port-protocol
vlan mac
vlan mac range
vlan ip
vlan ipx
vlan protocol
vlan user
vlan port
April 2006
Defining VLAN Port Assignments
Chapter 8, "Defining VLAN Rules."
page 4-9